Scotchman CPO 350 PKPD Cold Saw
Scotchman CPO 350 PKPD Cold Saw
- Cutting Speeds: Must Specify when Ordering
- LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe: LT (Low Turn): 22 rpm / 44 rpm - Motor rate: 3 HP
- HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material: HT (High Turn): 44 rpm / 88 rpm - Motor rate: 2.5 HP
- VS (Variable Speed) ~ wired 230/460, 3-ph: VS (Variable Speed): 11 / 177 rpm - Motor rate: 5 HP
- VS (Variable Speed) ~ wired 220, 1-ph: VS (Variable Speed) ~ 11 / 177 rpm - Motor rate: 5 HP
- SS (Single Speed) designed for 220v 1 ph applications: SS (Single Speed): 44 rpm - Motor rate: 3 HP
- 90 Degree Tubing: 90 Deg
- 90 Degree Round: 4-1/2" (114 mm)
- 90 Degree Square: 4-1/4" x 4-1/4" (108 x 108 mm)
- 90 Degree Rectangle: 5-1/2" x 4" (140 x 102 mm)
- 45 Degree Tubing: 45 Deg
- 45 Degree Round: 4" (102 mm)
- 45 Degree Square: 4" x 4" (102 x 102 mm)
- 45 Degree Rectangle: 4" x 4" (102 x 102 mm)
- 90 Degree Solid: 90 Degree
- Factory Wired: Specify 208 3 ph, 230 3 ph,460 3 ph,575 volt 3 ph 60 hz,220 volt 1 ph 60 hz (SS model only)
- Maximum Diameter Blade: 14"
- Arbor Bore: 1-9/16"
- Pin Spacing: 4/12/1964
- Width: 21-7/8"
- Depth: 43-1/2"
- Height not including handle: 56-1/4"
- Height from floor to vise: 37-7/16"
- Shipping Weight: 760 lbs
- Semi-Automatic Cycle
- Air Operated Power Double Self-Centering Vise Assures Burr-Free Cuts
- Pneumatic Power Down Feed with Electric Controls
- Emergency Stop Button
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Devise: Quick, Accurate Setting-Stops at 45 degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- Two Cutting Speeds (LT 22/44 rpm Or HT 44/88 rpm)
- Double Reduction, Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 12-1/2" Diameter (315 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt /3 Phase Electrics (must specify voltage)
- Warranty three Years on Parts
- Made in USA
Scotchman CPO 350 PKPD Cold Saw
- Cutting Speeds: Must Specify when Ordering
- LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe: LT (Low Turn): 22 rpm / 44 rpm - Motor rate: 3 HP
- HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material: HT (High Turn): 44 rpm / 88 rpm - Motor rate: 2.5 HP
- VS (Variable Speed) ~ wired 230/460, 3-ph: VS (Variable Speed): 11 / 177 rpm - Motor rate: 5 HP
- VS (Variable Speed) ~ wired 220, 1-ph: VS (Variable Speed) ~ 11 / 177 rpm - Motor rate: 5 HP
- SS (Single Speed) designed for 220v 1 ph applications: SS (Single Speed): 44 rpm - Motor rate: 3 HP
- 90 Degree Tubing: 90 Deg
- 90 Degree Round: 4-1/2" (114 mm)
- 90 Degree Square: 4-1/4" x 4-1/4" (108 x 108 mm)
- 90 Degree Rectangle: 5-1/2" x 4" (140 x 102 mm)
- 45 Degree Tubing: 45 Deg
- 45 Degree Round: 4" (102 mm)
- 45 Degree Square: 4" x 4" (102 x 102 mm)
- 45 Degree Rectangle: 4" x 4" (102 x 102 mm)
- 90 Degree Solid: 90 Degree
- Factory Wired: Specify 208 3 ph, 230 3 ph,460 3 ph,575 volt 3 ph 60 hz,220 volt 1 ph 60 hz (SS model only)
- Maximum Diameter Blade: 14"
- Arbor Bore: 1-9/16"
- Pin Spacing: 4/12/1964
- Width: 21-7/8"
- Depth: 43-1/2"
- Height not including handle: 56-1/4"
- Height from floor to vise: 37-7/16"
- Shipping Weight: 760 lbs
- Semi-Automatic Cycle
- Air Operated Power Double Self-Centering Vise Assures Burr-Free Cuts
- Pneumatic Power Down Feed with Electric Controls
- Emergency Stop Button
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Devise: Quick, Accurate Setting-Stops at 45 degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- Two Cutting Speeds (LT 22/44 rpm Or HT 44/88 rpm)
- Double Reduction, Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 12-1/2" Diameter (315 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt /3 Phase Electrics (must specify voltage)
- Warranty three Years on Parts
- Made in USA